We offer our clients a fine and excellent grade Rotary Send Dryer, which is used in drying and cooling of materials that flow freely. This product is provided with a rotating shell which is supported on rollers & tires. Our product is available in various configurations.
On the inner wall of the cilinder/drum, there are many lifting plates which is welded according to one special methods. When the Sand Dryer drum is rotating, these lifting plates makes the sand up and down to mix with the hot air completely. Durng this process, the moisture is evaporated.
On the another side of the silica sand dryer, there is one high pressure draught fan which sucks out the steam, and then the steam goes into the cyclone dust separator.
In the cyclone dust separator, the dust inside the steam falls down and goes out through the discharging hole of the cyclone dust separator. The steam goes into atmosphere directly through the chimney which is connected to the cyclone dust separator.
S.N | MODEL SIZE | INPUT | OUTPUT | FULE (Fire) | INLET/OUTLET |
---|---|---|---|---|---|
(MM) | MOISTURE | MOISTURE | Direct/Indirect | TEMPERATURE | |
1 | 1200 × 6000-20,000 | 10-25% | 8% | Diesel,Fo,Gas,Coal,Hoat Air,Ect.. | 400±50°C |
2 | 1500 × 6000-20,000 | 10-25% | 8% | Diesel,Fo,Gas,Coal,Hoat Air,Ect.. | 400±50°C |
3 | 1800 X 6000-20,000 | 10-25% | 8% | Diesel,Fo,Gas,Coal,Hoat Air,Ect.. | 400±50°C |
4 | 2000 X 6000-20,000 | 10-25% | 8% | Diesel,Fo,Gas,Coal,Hoat Air,Ect.. | 400±50°C |
5 | 2200 X 6000-20,000 | 10-25% | 8% | Diesel,Fo,Gas,Coal,Hoat Air,Ect.. | 400±50°C |